ISM-7412E Limits not working as expected per User Manual
I’m having an issue with the ISM-7412E versus what is in the User Manual. On Page 17 in Figure 19 it is indicated that the Limits should be Active when no current is flowing in the circuit (the ground...
View ArticleCVS1458RT, EtherCAT 9144, Softmotion
Hi, Just wanted to confirm. I want to use a 9263 analog output and a 9411 diff channel installed on an EtherCAT 9144 châssis.I then want to use a CVS 1458RT and use Softmotion RT loop to control those....
View Articlebreakpoint motion
i'm new with NI motion and i want use breakpoint to trigger an external device,i use a PCI 7344 and UMI 7604. when i turn my VI the axis statue indicate that the breakpoint is occured but in the output...
View ArticleIs there anyone who used Ulsis SA100V180A 18kw PWM AMPLIFIER
Dear All is there anyone who used Ulsis SA100V180A 18kw PWM AMPLIFIER. I found this module on the link below,http://www.ulsis.com/#!products/c1n8oThis products looks like amazing and I am curious about...
View ArticleProgramatically engage and disengage brake
Hi All, Im using a cRIO-9030 with a Kollmorgen AKM servo drive and a motor with a brake. Is there a way to engage and disengage the brake using softmotion? There is a "Brake Enable" property node, but...
View ArticleControl 3 stepper motors with labview and NI .
Hello I'm an engineer student ; and I want to control 3 stepper motors for moving along (x , y , z) three axis with labview and NI hardware . I haven't no idea about NI product. I ask for what kind...
View Articleanalog input as position reference for motor control
Dear Sir/madam I am working on NI motion PCI 7358 series card.Can anyone give me a sample program to use position loop using analog feedback.I am using a position sensor which gives 0 -10 v DC voltage...
View Articleanalog input as position reference
Dear sir I have used PCI 7358 Ni card for position control using incremental encoder.Similarly I want to use analog input as position refrence.I am attaching vi of position loop.What changes can be...
View ArticleInteractive Test Panel doesn't move AKD motor, no errors
Hello, I have run into a problem which will soon turn my hair grey before time. Weeks ago, I made VIs to control 4 AKD motors on a cRIO target. It worked just fine, no problems. Now I've returned to...
View Articlehoming using Find Reference giving me Modal errors
Hello,We have an NI PXI-7354 Stepper/Servo controller controlling a Primatics PN 0-7205-0012 2-axis drive, running 2 Micos DT-120 rotary stages. Recently we have been experiencing modal errors during...
View ArticleClik here to view.
update firmware 3.0.0f0 in myrio 1900 to 3.5.0f0 and thrusters not running...
Dear,I run to this problem when I updated the firmware in myrio 1900 from version 3.0 to 3.5. Before update the thrusters was running fine by using the run engine, after update the thrusters not...
View ArticleLichuan LCDA357H
Hello everybody, many stepper driver have the option to be controlled via RS232 or a similar port in LabView. In my case this works fine with a stepper motor and stepper driver from Nanotec. I cannot...
View ArticleMotorized telescopic mechanism I can buy to lift 4lb PVC barrel w/ computer?
My obsession for helping my son makes it impossible for me not to try to help him in all things. Son’s latest assignment "Mechanized T-Shirt Launcher with computerized aiming". I am going to leave all...
View ArticleI have a displacement control subroutine in lab view should changed to...
Hi Guys....I have two servo motors (AKD) with NI 9516 dual encoder and analog AKD servo drive, i-axis brushless servo motor with analog interafce....displacement control system id done by previos...
View ArticleFaults + AKD + 7358 + NI Motion
I have the AKD set up to clear faults whenever the HW Eneable line resets. Using MAX, I am able to do this only when hitting INITIALIZE. Starting and stopping (using HALT) doesn't reset the...
View ArticleClik here to view.
Terminal window on motion control programmer is displaying 2 characters for...
I just started programming on motion control programmer.This happens when I go to type anything in the terminal window. Why does it type twice even if I type once? Thanks for the answers!
View ArticleNew target point during motion
Hi, I'm new to Softmotion 2015, I used to work with Softmotion 2009. I've tried the new version yesterday and it is working so far. The only thing I have a problem with is when the axis is in motion...
View ArticleClik here to view.
the IP address of Starter kit2 robot changed
I use the Hardware setup wizard to configure the Starter Kit2 Robot. At step3, the robot was detected successfully, but the IP adress was 0.0.0.0 which was different from the correct...
View Articlep70530 blink red
I am a french student in internship in an university and I have to fix a problem with one of your products : a P70530 Microstepping Drives. In fact, this one blink red constantly, so I check...
View ArticlePCI-7342 Motion control for Pressure and data fast data acquisition
I am using PCI-7342 to control the servo valve in the pressure cycle control. The pressure is cycled with he trapezoid wave which switch from low pressure to high pressue in 0.4ms, and it requires to...
View Article