sisu 1004 and scan mode
Hi, I am trying to use the SISU-1004 stepper motor module in a NI-9146 expansion chassis with the NI SoftMotion module.It seems that I can't acces to the other C-modules in the chassis in scan mode.Is...
View ArticleEthernet Stepper motor- ISM-7411
Some questions regarding the Ethernet Stepper motor- ISM-7411: I would like to make a wheel to turn to 24 fixed positions. 1.How many 'Steps/Rev' do I need to set up? And where can I set up the...
View Articleimage
Hi, I use a digital camera to capture a picture from a drop. I've heard that with NI MAX, I can measure the diameter of the drop. I'd like to know if it is possible? If so, How? ThanksPetar
View ArticleURGENT!!! motor speed control
Dear all, first let me tell you my system detail:1. Hacker A100-8 brushless DC motor2. Master spin 170 pro opto (speed controller)3. power supply4. NI DAQ USB-6353 I have already run this motor by...
View ArticleHave troubles switching between two ethernet stepper motors
Hi, Please see the attached files.Only the Axis which was initialized first is moving. The same motor moves from Step 1 (Rotate)-->Step 2 (Tilt Up)--> Step 3 (Tilt Down).The other axis is not...
View ArticleClik here to view.
Communication with Festo CMMO-ST (how to TCP)
Hello, As the subject says, I'm trying to connect and 'talk' with a motor controller from festo (CMMO-ST-C5-1-DIOP).I'm using the TCP protocol, and am supposed to send bytes to the controller. While...
View Articleni9516采集卡
终端中加载nimc.createStraightLineMoveInstance.coordinate.vi时出错并已关闭。 LabVIEW: 无法加载共享库nimclv.dll:nimclvPropBatch:C。请确保RT终端上存在该库。MAX可用于安装NI软件或FTP，以便向RT传递自定义库。 正在部署 ni9516 LabVIEW: (Hex 0x80DF001E)...
View ArticleCannot get hardware limits to work when using Lintech switches with a ACR9000...
This has been my conversation with Parker Automation.From: Susan Connors <susan.connors@crossco.com>Date: April 21, 2015 at 8:52:55 AM CDTTo: Bowlerdusty <bowlerdusty@aol.com>Subject: Re:...
View ArticleTwo Axis Stepper Motor Driver/Controller
Hi, I’m new to motion control so please excuse any bluntness. I am trying to set up a system which can perform linear and rotational motion, controlled independently. I have a dual axis actuator...
View ArticleDo I need more hardware to connect a dc motor to labview via CAN?
Hi, I have a current setup with a Dunkermotoren BG75CI connected to NI-9171 and NI-9234.I have connecting between MAX and NI-9234 but now I need connection between Labview and the dc motor to be able...
View ArticleClik here to view.
i have a big delay in my real time pid control
hi ,since i don't have a digital input module i tried to use the serial port RS232 on my Crio to read the data from an absolute encoder in order to perform PID control for a dc motor, but the problem...
View Articleerror 77009 labview 2014 with solidworks 2015
hello please am a student i want to ask you some quastion that i have probs with iti want to creat an application with labview 2014 and solidworks 2015 with softmotion simulation so i got a probs...
View ArticleControlling Stepper Driver TB6560
I am using a USB-6009 DAQ and want to control a stepper motor. I bought a cheaper stepper driver (TB6560) that uses the standard enable, direction, and pulsed signal. I found a great example that is...
View ArticlePXI-6602 & SCB-68
Hello, I currently own a SCB-68 with the PXI-6602. Are the two items compatible with each other?I seem to think so but NI says they are not. The reason I called them up is because I haven't been able...
View ArticleMotion Control Program VI
Hello, Currently I have a LabView VI to control an XY Positioning System with two stepper motors and Unislide assembly using MD125 micro-step driver and NI PCIe - 6321 Multifunction DAQ device. I need...
View ArticleSoftmotion example in simulation
I am using LabVIEW 2014 SP1 with SoftMotion Module 2014 (version 14.1.2 reported in MAX). I have an issue when I run the FPGA code in simulation mode. I've created a test project by using Create...
View Articlehow to keep PWM express VI working correctly while a customlised FPGA VI is...
I am working a motor control project which requires at least four PWM signals to control 4 motor based on some control logic. To make the PWM generation easier, 4 PWM express VI on RT target are used...
View ArticleControl Stepper Motor with NI USB-6009
Hi All, I'm currently trying to create a motion control system using a dual motion actuator...
View Articlestop motion
Hello,I'm using NI motion assistant to create 2 different motions in 2 vi's. Each motion includes a lot of different positions with measurements in between.I have put these 2 motions vi's in a state...
View ArticleSCB-68 Pin#8 (+5V) not working
Hello, I am using PCIe-6321 DAQ and SCB-68 connector block to connect two stepper motor drivers and drive the stepper motors. I need to provide +5 volts to my driver in order to power the emitter diode...
View Article