Clik here to view.
Comment trouver Board ID sur MAX?
Bonjour, Comment je peux trouver Board ID de la carte PCI 7334 sur MAX?
View ArticleSetting Position to Zero
I have a system that is controlling several stepper motors via network variables and I need to be able move the motors and then zero each axis position so that can use the new zero as the "home". I...
View ArticleHow to generate SVPWM signal ?
Hi, everyone. I just motor drives beginner. I am trying to build a simulation system which includes SVPWM controls a PMSM. I have a trouble on building SVPWM. I am very confused with the relationship...
View ArticleDriving a Stepper motor with NI-9503 and cRIO-9035
Hello, I'm a student from the University of Auckland currently working on a project that requires the use of PWM Stepper motor driver (NI-9503) which is connected on cRIO-9035. This is to drive a...
View ArticleChoosing parameters for Anti-Resonance function
Hi all, I am trying to control a stepper motor with the NI-9503 driver. I would like to apply the anti-resonance function, but can't find any information about the coefficients (more than in the help...
View ArticleClik here to view.
Error 70217 softMotion+cRio/+Axis, a required resource is in fault state
Hi, I am working on getting an existing program to run on LabVIEW 2016 on a new computer. The program sends a command through cRIO to move a motor, aka "axis 1." When I attempt to run the program, I...
View ArticleMG17Motor is not available in ActiveX object
Dear FriendsI am simulating a program to control Thorlabs microscopy stage driven by a servo motor. I have started with putting activeX container in front panel, now an object called MG17Motor is...
View ArticleMTBF for NI 9512
Hello, Im looking for information of minimal time before failures(MTBF) for NI 9512. There is recomendation in user manual to ask technical support for this information. Can somebody help me with it?...
View ArticleReplacement for MID-7604
MID-7604 is obsolete.What's the best replacement for existing projects? It's connected to a PXI system.
View ArticleOver-current Error with NI-9503
Hello, So, NI-9503 is currently on cRIO-9035. A few days ago, I've accidentally short circuited the power supply that was connected to NI-9503 and cRIO-9035. After replacing the power supply, they are...
View Articlesmooth motion of many line moves
I'm still very new to LV, so please do correct me if it seems that I have misunderstood something.My goal is to control 3 Servos with a crio 9074, the servos are connected each to an akd drive. The...
View Articlefunction of Time Interval for Straight-Line polymove
Hey, I'm stille quite new to LV would like to know what the Time Intervall property for a straight line polyline move does. I have an idea but am not sure. I tried to study the behavior using the...
View ArticleTo customize ActiveX control for Thorlabs APT Brushless DC controller for XY...
Hi I am using ActiveX control in LabVIEW to operate Thorlabs Brushless BBD202 controller and MLS 203 stage to get X-Y scan profile. APT software of Thorlabs need to be installed to do this work.I have...
View ArticleClik here to view.
THB6128 can not drive motor to reverse
Hello~ everyone These days I have a problem that THB6128 can not drive motor to reverse. After the change of the chip CW/CWW's current, the motor was unable to change the driving direction or the motor...
View ArticleSoftmotion Ethernet Steppper Drive Error -70229 and -77072
Dear all,we are experiencing timeout errors with our Ethernet Stepperdrives (SMD 7615).Software: LabVIEW 2016 on a Windows-Host with the Softmotion Module.Hardware Setup: Three Ethernet Stepper Drives...
View Article3 Axis motion control with EtherCAT drives and FPGA
I'm still very to labview so please bear with me, even if my questions seem trivial. My Setup:- cRIO 9074 - Kollmorgen EtherCAT AKD-x00306 - 3 AKM 21 Motors - Labview 2016 My goal is to control 3 axis...
View ArticleBest way to Belnd many moves
My final goal is to control a 3 axis system using a crio 9074 and EtherCAT AKD drives. At the moment I'm only simulating my code to find the best structure.In my project I have a coordinate system...
View ArticleDynamixel motor wheel mode velocity control cw / ccw
Hi~I use LabVIEW to control dynamixel AX-12 motor, and use velocity command to motorHow can I change from CW to CCW in LabVIEW? Thanks
View ArticleControl DC Motor with NI PXI-7350 Motion Controller
Hello everybody, I am quite new with NI. I have a question that needs your support. All responses are highly appriciated.We purchased a NI computer with 2 NI PXI-7350 Motion Controller Cards. The...
View ArticleContour Move vs Straight Line Move
Hello, I am using NI9516 with a Kollmorgan AKD Basic Drive using Analog Control. I am able to move it sinusoidal movement with both straight line move and contour move although I think I would like...
View Article